Email:info@kuntai-group.com Jiangsu Kuntai Machinery Co.,Ltd

Jiangsu Kuntai Machinery Co.,Ltd

Adhesive Sticker Laminating Machine Accuracy Requirements

The accuracy of LED components relative to the accuracy requirements of SMT components is relatively low, so the speed of LED products posted faster than SMT products, Adhesive Sticker Laminating Machine because the SMT chip in the accuracy requirements higher than the LED, Mounter equipment in the paste Installed in the processing speed is also slow, placement efficiency is also naturally reduced.

1, Adhesive Sticker Laminating Machine the placement of the nozzle on the one hand is the lack of vacuum negative pressure, suction nozzle before the automatic conversion of the head of the mechanical valve, by the blowing into the real adsorption, resulting in a certain negative pressure, Adhesive Sticker Laminating Machine Negative pressure sensor detection value within a certain range, the machine is normal, otherwise poor suction.

Such as rubber gas pipe aging,Adhesive Sticker Laminating Machine rupture, seal aging, wear and nozzle wear after prolonged use, etc., Adhesive Sticker Laminating Machine on the other hand is due to the adhesive or the external environment of dust, especially paper tape with the packaging Components in the cut off after a large number of waste generated, resulting in patch machine suction nozzle block

2, the placement machine on the program set the error will also reduce the placement machine placement efficiency, the solution is the placement machine manufacturers to increase customer training efforts, Adhesive Sticker Laminating Machine so that customers can get started faster.

3, the quality of electronic components, suction nozzle pick up electronic components, the pin is not completely posted into or directly bent down or cut off. Adhesive Sticker Laminating Machine This situation can only be purchased in the quality of the components installed on the control, Adhesive Sticker Laminating Machine this will not only affect the placement efficiency and product quality, nozzle often pick up the placement of such components, but also cause varying degrees of damage , Over time will make the nozzle life is reduced.

On the impact of placement machine placement efficiency of the problem to explain here, Topco remind: choose SMT-related equipment must find the strength of the enterprise, Shenzhen City Topco Industrial Co., Adhesive Sticker Laminating Machine Ltd. is a professional SMT / AI equipment supply Business, the company focused on providing SMT / AI equipment, parts, services and solutions, Adhesive Sticker Laminating Machine such as the need for more SMT line of the details of the solution, please pay attention to our WeChat public number: smt placement machine

The meaning of the placement rate The so-called placement rate refers to the device in a certain period of time the number of the actual number of stickers and the number of suction, that is: the placement rate = × 100% suction number of which the total number of pieces is the number of suction errors, Adhesive Sticker Laminating Machine The number of pieces, the number of lost, etc., Adhesive Sticker Laminating Machine and identify the error and sub-device size specifications and device optically poor identification of two. Milling machine Whether it is minicomputer, medium machine, mainframe, and both medium speed machine, high speed machine, they are mainly by the device storage device, Adhesive Sticker Laminating Machine XY table, placement head and control system. Placement is the core and key components of the placement machine, Adhesive Sticker Laminating Machine the head is generally fixed head and the head of the rotary, Adhesive Sticker Laminating Machine fixed general long arrangement, Adhesive Sticker Laminating Machine as few as two, as many as eight, at the same time or a separate pick, And in the horizontal plane rotation and rotation in the vertical plane.

The entire process of the placement of the equipment from the point of view, in the correct set of suction pickup height, pick the mouth of the nozzle and the relative position of the feeder, Adhesive Sticker Laminating Machine the impact of equipment placement rate is the main factor in the pickup position , According to the equipment of the production of information intelligence, Adhesive Sticker Laminating Machine the impact of the total impact of more than 80% of the factors. The reasons are: on the one hand is the device storage device on the feeder, on the other hand is the nozzle, the two feeder in the film about 60%, about 40% is due to nozzle pollution caused.


Copyright © Jiangsu Kuntai Machinery Co.,Ltd All rights reserved.
QR Code