Email:info@kuntai-group.comJiangsu Kuntai Machinery Co.,Ltd

Jiangsu Kuntai Machinery Co.,Ltd

Adhesive Sticker Laminating Machine Efficiency

Adhesive Sticker Laminating Machine SMT machine mounting efficiency with the import Mounter and domestic Mounter, in general, the current placement of SMT machine to compare the efficiency of domestic SMT machine to install higher. The mounting efficiency of the mounter is related to the components to be affixed, SMT machine mounting is not only to be fast but also accurate and stable, if the paste led components and SMT other components than, Adhesive Sticker Laminating Machine Mount LED components do not require too high precision mount efficiency than SMT other components higher than a lot. But why does the mounter use a period of time after the placement efficiency is low?

1, the Patch machine suction nozzle on one hand is the vacuum negative pressure insufficiency, chip machine suction nozzle before the automatic conversion of the mounting head of the mechanical valve, from blowing gas to vacuum adsorption, resulting in a certain negative pressure, when the absorption of the product, the negative pressure sensor detection value within a certain range, the machine normal, Adhesive Sticker Laminating Machine and vice versa. On the other hand is the gas source circuit pressure relief, such as rubber trachea aging, rupture, seal aging, wear and suction nozzle long after the use of wear, mounter on the other hand is due to adhesives or external environment of the dust, especially the paper tape packaging components in the cut after the production of a large number of waste crumbs, resulting in a patch machine suction nozzle plugging.

2, Mounter program on the setting of the error will allow the SMT machine to reduce the efficiency, the solution is to patch machine manufacturers to increase the training of customers, so that customers can get started faster.

3, electronic components of their own quality, Adhesive Sticker Laminating Machine suction nozzle pick up electronic components affixed to the patch machine pins are not fully affixed or directly bent or broken off. This situation can only be purchased in the quality of SMT components control, this will not only affect the work efficiency and product quality, suction nozzle often pick up stickers such components, Adhesive Sticker Laminating Machine will also cause different degrees of damage, over time will also allow the use of suction nozzle life.

Once the placement efficiency of the patch machine after the use of a period of time significantly lower recommendations for a comprehensive inspection of the patch machine, in general this phenomenon is a part of the cause of the failure, here to remind you that the chip machine suction nozzle must be regular and maintenance.

Copyright © Jiangsu Kuntai Machinery Co.,Ltd All rights reserved.
QR Code