Email:info@kuntai-group.com Jiangsu Kuntai Machinery Co.,Ltd

Jiangsu Kuntai Machinery Co.,Ltd

Adhesive Sticker Laminating Machine Regular Maintenance

Mounter placement efficiency with the import placement machine and the domestic placement machine, Adhesive Sticker Laminating Machine in general, the current placement of the placement of the placement machine to compare the efficiency of domestic placement machine placement more efficient. Adhesive Sticker Laminating Machine Mounter placement efficiency and with the components to be mounted on the placement of the placement machine is not only fast to be accurate and stable, if the placement of LED components and SMT other components than the placement of LED components do not Requires too high precision placement efficiency than SMT other components much higher.

1, the placement of the nozzle on the one hand is the lack of vacuum pressure, Adhesive Sticker Laminating Machine the placement of the nozzle before the automatic transfer of the head of the mechanical valve, the blower into a vacuum adsorption, resulting in a certain negative pressure, , The negative pressure sensor detection value within a certain range, the machine normal, and vice versa suction bad. On the other hand is the air source circuit pressure relief, such as rubber pipe aging, rupture, seal aging,Adhesive Sticker Laminating Machine wear and nozzle wear after prolonged use, etc. On the other hand, the placement machine is due to adhesive or dust in the external environment, Paper tape with the packaging components in the cut off after a large number of waste, resulting in patch machine suction nozzle block.

2, the placement machine on the program set the error will also reduce the placement machine placement efficiency, the solution is the placement machine manufacturers to increase customer training efforts, Adhesive Sticker Laminating Machine so that customers can get started faster.

3, the quality of electronic components, suction nozzle pick up electronic components placement, placement machine pin is not completely posted into or directly bent down or cut off. Adhesive Sticker Laminating Machine This situation can only be installed in the quality of the components installed on the control, this will not only affect the placement efficiency and product quality,Adhesive Sticker Laminating Machine nozzle often pick up the placement of such components, but also cause varying degrees of damage , Over time will make the nozzle life is reduced.

Once the placement of the placement machine efficiency after a period of time significantly lower recommendations on the placement machine to conduct a comprehensive inspection, in general, Adhesive Sticker Laminating Machine this phenomenon is a component of the reasons for the failure, here to remind you that the placement machine must Regularly regular maintenance.


Copyright © Jiangsu Kuntai Machinery Co.,Ltd All rights reserved.
QR Code