Email:info@kuntai-group.com Jiangsu Kuntai Machinery Co.,Ltd

Jiangsu Kuntai Machinery Co.,Ltd

Cutting Machine Flexible Processing Features

Fiber laser cutting machine good flexible processing characteristics, greatly improving the metal processing industry flexibility, improve the processing efficiency and processing accuracy. The laser beam is directly and guided by two methods, the laser can be used for rotation, tilt, Cutting Machine up and down left and right movement, can process the vertical surface of the workpiece and other complex workpiece surface; and direct drive without air, high precision. With the machine to move or multi-axis way to turn the parts under the beam, can be processed using some of the traditional methods of processing more difficult parts. Cutting Machine The laser head can move freely up and down, the workpiece can be fixed at the time of processing, still can realize the processing of complex workpieces, and can use the moving rotary table to process the parts with large axial travel. The laser beam is controlled by auto focus. The laser system linear axis can be positioned along the optical axis or any axis to keep the beam focused; the focus position is accurate at any time and the travel is unlimited. The advantages of flexible cutting of fiber laser cutting machine are mainly reflected in the following aspects: the laser itself is a relatively simple and easy to control the device, if it produces the beam into a very fine light beam, you can cut; You can weld; Cutting Machine then defocus a little, you can heat treatment.

The combination of laser control and robots, with the robot to move or multi-axis way to flip the parts under the beam, can be processed with some traditional methods of processing more difficult parts. Laser head can be free to move, the current laser head has reached five sports axis, even if the workpiece in the processing to keep fixed, can still achieve the processing of complex parts, and as long as the use of mobile rotary table, machining parts larger than the axis The The laser beam is controlled by auto focus. The laser system linear axis can be positioned along the optical axis or any axis to keep the beam focused; the focus position is accurate at any time and the travel is unlimited. The use of laser processing, not only processing speed,Cutting Machine high efficiency, low cost, and to avoid the mold or tool replacement, shorten the production preparation time cycle. Easy to achieve continuous processing, laser beam transposition time is short, improve the production efficiency. Can be a variety of workpiece alternately installed. Cutting Machine When a workpiece is machined, the finished parts can be removed and the workpiece to be machined, parallel machining, reduced installation time, and increased laser processing time. Cutting Machine Take the multi-level rapid response of the anti-collision measures, beam guide device contact the workpiece, the movement system immediately shut down, so that the system is not destroyed, to avoid the expensive maintenance; Cutting Machine after the collision can quickly and simply resume work, reducing the collision caused by downtime Time, improve the processing efficiency and reliability of the laser system.


Copyright © Jiangsu Kuntai Machinery Co.,Ltd All rights reserved.
QR Code