Email:info@kuntai-group.com Jiangsu Kuntai Machinery Co.,Ltd

Jiangsu Kuntai Machinery Co.,Ltd

Laminating Machine Of The Main Equipment

High-speed dry compound machine HWY-1350M is the main equipment of the packaging and printing industry, is the material of two different or more layers are not exclusive or cloth and cloth, Laminating Machine cloth and paper, cloth, leather and various plastic, rubber sheet The rolls are heated to melt them, semi-molten or have a special binder compound as one of the machines. Trying to find faster, Laminating Machine better working conditions in high temperature desorption assembly. The program uses a four-party electrical v350 inverter to control the motor speed. The printing presses the composite tape into the printing unit through the guide roller into the printing unit through the back of the printing process through a series of processors, Laminating Machine and the traction roller is applied from the printing unit to the next process.

The composition of the wet high-speed dry compound machine has the following components: unwinding department, coating department, Laminating Machine composite materials industry dry place, winding road. It can also be seen that the temperature drop of the water in the refrigerator is synchronized with the temperature drop of the refrigerant in the evaporator. This rich contour clear evaporator design is very reasonable and can effectively put the latent heat of the refrigerant into Cold water. Laminating Machine If the substrate is greater expansion rate, the deformation of the deformation under the tension easier, so should be different for the material of the substrate to adjust the rectifier output, change the speed difference, so as to obtain the appropriate tension value. If the system is given a shift, Laminating Machine run the speed subroutine, the system eventually reaches the speed of inexhaustible use of the new system. ° C, the desorption temperature of 60 ° C is 90 ° C, Laminating Machine and the assembled cop increases with the increase of the maximum desorption temperature.

Composite machine is simple to be two or more than two kinds of materials combined with a composite equipment, widely used. And the composite machine according to the use of different can be divided into many types, Laminating Machine the following we will briefly introduce the characteristics of the flame-type composite machine and use.

Flame type laminating machine is mainly used for sponge and other types of textile products combined effect. Its main feature is the use of flame-retardant sponge and used as a binder, Laminating Machine in this process will not use glue. After the flame of the spray to melt and adhesion, in the plush, deerskin paste on a very good application. And the most important thing is to have environmental protection, feel good and washable and so on.


Copyright © Jiangsu Kuntai Machinery Co.,Ltd All rights reserved.
QR Code